Welcome to Wuxi high-tech ultra thin stone material Co.,Ltd.  
简体中文 | ENGLISH
 
About us
Qualification certificate
Production equipment
Installation drawing
Contact us
 
Wuxi high-tech ultra thin stone material Co.,Ltd.
Address: No.9, Jinghua road, Industrial park,Xibei Town, Xishan district, Wuxi
Tel: 86-510-83922668
Fax: 86-510-83922778
Contact: Mr Du
Mobile phone: 86-18115395629
QQ:905979741
Zip code: 214194
Email: 905979741@QQ.com
 
 
- News and information
 
The stone honeycomb panel tells you how to install the stone honeycomb panel
Update time: 2021/11/20 13:55:40    Clicks: 757    

1. Lug type: the installation method is to separate the lifting lug from the honeycomb plate. After the lifting lug is treated separately, the adhesive joint is connected with the honeycomb plate, and the appropriate width of the adhesive joint is ≥ 12mm. The installation method has the advantages of simple processing and convenient installation. 2. Flanging type: the installation method is to process aluminum honeycomb plate, that is, process the installation flange. The installation only needs to be connected with the keel and glue. The appropriate glue joint width is about 10mm. This method is simple to install, but the process is slightly complex, which is not suitable for the modeling of curtain wall panel. 3. Buckle type: the node is aluminum buckle, which is easy to install after deducting specific configuration files. However, this method requires high machining accuracy of metal plates and is not recommended for plates with a length of more than 3000 mm. Buckle width, 20 mm and 40 mm sheet stitching, etc. Specific construction steps of stone honeycomb plate: 1. The stone louver shall be perpendicular to the keel positioning and release line. The keel installation elevation deviation shall not be greater than 3mm, the axial front and rear deviation shall not be greater than 2mm, and the left and right deviation shall not be greater than 3mm. 2. The vertical steel keel is welded with the steel structure, the weld height is 6mm, there is no false welding, slag inclusion, and the undercut is less than 0.5mm. 3. Angle steel and vertical keel are connected by stainless steel bolts. Spring washers are used for relaxation. Adjust the position of the angle code. The front and rear deviation of the axis shall not be greater than 1mm. Tighten the bolts after adjustment. 4. The aluminum alloy beam and corner code are connected by stainless steel bolts and relaxed by spring washers. The beam shall be horizontal, and the horizontal elevation deviation of two adjacent beams shall not be greater than 1mm. Elevation deviation on the same floor: not more than 5mm when the curtain wall width is less than or equal to 35m, and not more than 7mm when the curtain wall width is greater than 35m.
Total:1 pages  page: 1  

Previous:Aluminum honeycomb composite rock plate   Next:Application of ultra thin stone honeycomb board in decoration market
Add: No.9, Jinghua road, Industrial park,Xibei Town, Xishan district, Wuxi
Tel: 86-510-83922668  Fax: 86-510-83922778
Contact: Mr.Du  Phone: 86-18115395629  QQ:905979741  Zip code:214194 
E-mail:905979741@qq.com Web:http://www.gkcbsc.com
 
All rights reserved: Wuxi high-tech ultra thin stone material Co.,Ltd.