 |
|
| |
 |
Wuxi high-tech ultra thin stone material Co.,Ltd.
Address:
No.9, Jinghua road, Industrial park,Xibei Town, Xishan district, Wuxi
Tel: 86-510-83922668
Fax: 86-510-83922778
Contact: Mr Du
Mobile phone: 86-18115395629
QQ:905979741
Zip code: 214194
Email: 905979741@QQ.com |
|
| |
|
|
|
- News and information
|
| |
| Production process and product characteristics of stone aluminum honeycomb panel | | Update time: 2022/1/14 13:46:11 Clicks: 737 |
| | Stone aluminum honeycomb plate is generally composed of 3-5mm stone and 10-25mm aluminum honeycomb plate, which is bonded and compounded with special adhesive. It is recommended that the stone thickness of stone aluminum honeycomb plate for external curtain wall is 4-5mm, and the thickness of aluminum honeycomb plate is not less than 25mm; It is recommended that the stone thickness of stone aluminum honeycomb plate for the inner wall is 3-4mm and the thickness of aluminum honeycomb plate is 15mm; For embedded ceiling, it is recommended that the stone thickness of stone aluminum honeycomb plate is 3-4mm and the thickness of aluminum honeycomb plate is 15-20mm; For the floor slab, it is recommended that the stone thickness of stone aluminum honeycomb plate is 5-8mm and the thickness of aluminum honeycomb plate is 10-15mm.
Production process and product characteristics:
(1) Fire protection: aluminum plate is non combustible material.
(2) The surface of aluminum honeycomb plate is treated with fluorocarbon and has strong corrosion resistance. There are no pinholes, cracks and blisters after 48 hours of salt spray.
(3) Environmental protection: the honeycomb panel is a pure aluminum product, does not volatilize any gas harmful to human body, has no radioactivity, and can be completely recycled. It is 100% environmentally friendly.
(4) The aluminum honeycomb panel is easy to disassemble and assemble without damaging the panel. Due to its light weight and convenient transportation, it can be transported to different places for reuse. This is another matter, and the diaphragm cannot be compared with it.
1. General specifications and dimensions. The general specifications and dimensions of aluminum veneer are as follows. Other specifications and dimensions can also be agreed by the supplier and the buyer.
Alloy: 1100 h243003 H24. Thickness: 1.8-3.0mm. Length: 2000, 2440, 3000, 3200, etc., in mm. Width: 1220, 1250, 1500, etc., in mm.
2. Specifications and dimensions of special-shaped plate. The specification and size of special-shaped plate can be agreed by the supplier and the buyer.
3. Coating type: polyester powder spraying, fluorocarbon powder spraying, stone powder spraying, etc | Total:1 pages page: 1  |
| | Previous：Installation method of honeycomb stone Next：Introduction to installation of honeycomb stone |
|
|
