 |
|
| |
 |
Wuxi high-tech ultra thin stone material Co.,Ltd.
Address:
No.9, Jinghua road, Industrial park,Xibei Town, Xishan district, Wuxi
Tel: 86-510-83922668
Fax: 86-510-83922778
Contact: Mr Du
Mobile phone: 86-18115395629
QQ:905979741
Zip code: 214194
Email: 905979741@QQ.com |
|
| |
|
|
|
- News and information
|
| |
| How thin can you make the stone honeycomb board? | | Update time: 2022/5/13 16:30:22 Clicks: 632 |
| | With the growth of the world population and economic development, the consumption of resources and the impact of the environment on the global resources and environment are becoming greater and greater. On this premise, stone honeycomb plate came into being.
Introduction to stone honeycomb plate: stone honeycomb plate is generally made of 3-5mm stone and 10-25mm stone honeycomb, which is made of special adhesive, which can not only save stone, but also reduce the weight of finished products, and better reflect the effect of stone. In some buildings, there are high requirements for load-bearing. Stone honeycomb board is a new type of building material. Its impact resistance is better than ordinary natural stone. Only 8-11 kilograms per square meter. It is 1 / 7 of the weight of ordinary natural stone, but its compressive strength is 3-5 times that of ordinary natural stone. It completely overcomes the shortcomings of natural stone, such as heavy weight and fragile.
Characteristics of stone honeycomb panel:
1. Light weight: the thickness of stone honeycomb plate can reach 5mm, light weight, low transportation cost and small load limit. This is the best choice.
2. Improve anti pollution ability: when installing or later using ordinary marble slab (through slab), such as wet cement slurry, there may be various discoloration and stains on the marble surface after half a year or a year, which is difficult to remove. Stone honeycomb aluminum plate avoids this situation because of its harder, denser substrate and a thin layer of glue.
3. It is easier to control the color difference: because the stone honeycomb board is cut into 3 or 4 raw stones. This 3, 4 / 4 mode is almost 100% the same as the color, so it is easier to ensure the consistency of color and pattern when used in a large area.
4. Convenient installation: due to the above characteristics, it is easy to break (strength, etc.) regardless of the weight during installation. Or color separation splicing, which greatly improves the installation efficiency and safety and reduces the installation cost.
5. Break through the forbidden zone: the decoration part of marble, whether internal and external walls, floors, windowsills, porches, desktops, etc., has no problem with ordinary stone, but for the ceiling, whether marble or granite, no decoration company dares or cannot bear this risk. Stone honeycomb composite board breaks through the forbidden zone of stone decoration. Because it is very light, the weight is only 1 / 5 to 1 / 10 of the body panel. This is the only way to decorate the ceiling with stone.
6. Sound insulation and moisture-proof: stone honeycomb board, because it is made of regular hexagonal aluminum honeycomb core, has sound insulation, moisture-proof, heat insulation and cold resistance.
7. Energy saving and consumption reduction: the stone honeycomb panel has the characteristics of sound insulation, moisture-proof and heat insulation, which can greatly reduce the consumption of electric energy and heat energy after indoor and outdoor installation. | Total:1 pages page: 1  |
| | Previous：What are the advantages of ultra-thin stone honeycomb board? Next：What are the advantages of stone aluminum honeycomb board? |
|
|
