 |
|
| |
 |
Wuxi high-tech ultra thin stone material Co.,Ltd.
Address:
No.9, Jinghua road, Industrial park,Xibei Town, Xishan district, Wuxi
Tel: 86-510-83922668
Fax: 86-510-83922778
Contact: Mr Du
Mobile phone: 86-18115395629
QQ:905979741
Zip code: 214194
Email: 905979741@QQ.com |
|
| |
|
|
|
- News and information
|
| |
| Introduction of stone aluminum honeycomb panel | | Update time: 2022/5/17 15:10:13 Clicks: 675 |
| | Introduction to stone aluminum honeycomb panel:
1. Tear off the folded part of the protective film on the surface of the aluminum honeycomb panel, and stick beautiful textured paper on the folded part at an angle of 90 °. The paper should be folded at a 90 ° angle to avoid wrinkling.
2. the aluminum honeycomb plate is filled with foam beech, which is dense and straight.
3. Glue filling shall be completed at one time from top to bottom and from left to right.
4. The scraping speed of aluminum mesh shall also be carried out according to the principle of "4 + 1".
5. Tear off the texture paper, pull it outward 45 °, and collect the torn texture paper into the dustbin to avoid polluting the environment.
6. After the weatherproof adhesive is dry, tear off the outer protective film during the coating process, and wipe off the surrounding dust with a dry rag.
There are several kinds of stone aluminum honeycomb panels:
1. For textured honeycomb panels, all irregular hand drawn drawings are changed to Auto CAD drawings. After confirmation, print three copies and bind them into a volume according to the batch number and drawing number. One for Technology (transferred to archives after completion), one for workshop and one for quality assurance inspection. 2. Drawings without aluminum honeycomb plate number shall be numbered uniformly. Further numbered drawing number: suffix + a stands for panel; Suffix + B stands for base plate; Suffix + C represents aluminum honeycomb core; wait
3. For the surface substrate of aluminum plate or other materials requiring sheet metal processing, the bending coefficient shall be carefully measured and filed.
4. Compile the catalogue and calculate the single piece area and total area, etc.
5. For the plate processed by sheet metal, draw the sheet metal unfolding drawing according to the bending coefficient and indicate the size. If the internal and external are not marked on the drawing, the extended drawing shall be drawn after implementation.
6. When NC programming is required, NC data and other data shall be submitted to the NC workshop for blanking.
Construction setting out of stone aluminum honeycomb plate:
1. The perpendicularity of the structural column is correct. Hang a vertical line on the axis of the keel installation position, measure the upper and lower points with a square, record the data, and enlarge the average value by 10mm.
2. Mark the axis position on the floor with a red and blue pencil and draw it with a 90 ° extension line with a square to determine the relative position of the keel axis. The correction error is the same as above.
3. The process of attaching the coating color to the aluminum coil during forming has strong adhesion, good durability and uniform color. The same batch of products basically have no color difference. | Total:1 pages page: 1  |
| | Previous：What are the characteristics of stone honeycomb board? Next：What are the characteristics of stone honeycomb panel compared with traditional stone |
|
|
